Yet another fringe case, one off product that no one may never have need for. This time we are replacing the choke rod bushing on a Yamaha YG450D generator. The original is a rubber piece, so you might could print this in TPU or other flexible material. I just used PLA and it works fine. In addition to this piece, you will need an o-ring to hold the part in place. The o-ring I used is 4mm inside diameter by 1.45mm thick. Just put the bushing in place through the mounting plate, slide the o-ring up into the groove to hold it in place and run the choke rod through the bushing. Easy peasy.
I am a self-proclaimed know-it-all. I will tackle any project regardless of my experience, or lack thereof. Always ready to learn something new. With over 25+ years experience in electronic repair and 10+ years experience in small engine / ATV / motorcycle repair, there is nothing I can't fix, modify or build.
Why a pepper? In case anyone is curious as to why there is a hot pepper embossed into most of my designs... My nickname is Pepper and that little pepper logo is a hell of a lot shorter than "Copyright © 2017 by Derek J.G. Tombrello" which is how I usually sign my work :)
In addition to PayPal.me donate using bitcoin via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx --or-- dogecoin at: DEKT6CjdR3uAKQjmiGteTAg8gvKphY9tw5
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!