FrameCorp Face Palm

FrameCorp is a set of simple frames that work by pressure. A system that is very easy to 3d print and allows you to customize the inside content of the frame.

The frames can be hung on the wall or placed on a table using the included brackets. Available at the moment in 3 sizes allowing 120x120mm, 200x120mm and 200x200mm designs to be placed internally.

This time I present you the Face Palm plate. Based on the glorious Captain Picard meme.

A must have for any self-respecting desktop. ;)

The backplate features a thickness of 1.8mm and color jumps every and 0.8mm.

The Face Palm board contains the following elements:

Frames:

FrameCorp_Frame_120x120

FrameCorp_Frame_200x120

FrameCorp_Frame_200x200

Brackets:

FrameCorp_Support_120

FrameCorp_Support_200

FrameCorp_Support_200x120 Crossbar

FrameCorp_Support_200x200 Crossbar

Face Palm:

FrameCorp_FacePalm_120x120

FrameCorp_FacePalm_200x120

FrameCorp_FacePalm_200x200

Follow this project and others at:

https://www.instagram.com/krcorp/

FrameCorp Base link:

https://cults3d.com/en/3d-model/various/framecorp-sistema

Other related Plates:

https://cults3d.com/en/3d-model/various/framecorp-nivel-1

3D PRINTING PARAMETERS

FRAMES:

Supports: No

Resolution: 0.2mm

Filling: 10%

Filament_material: PLA / PETG

PLATES

Supports: No

Resolution: 0.1mm

Filling: 100% or better I advise setting the lower print layers to 30 layers.

Filament_material: PLA / PETG

Color_jumps_measurements:

Base:1.8mm

Color level jump: Typically every 0.8mm