Skip to content

FPV Gate for Tiny Whoop

3D model description

for use with LED-strip print in transparent PLA. LED-strip width 8 mm. I use my old 3s or 4s Lipo with XT60 connector to operate the LED-strip.

New Version with 3x Segment joint!

10.05.2019 New Version Gate Stand V2 with extra lid. in printprogress you can insert in the lid 4 neodym magnets 4x10mm. in the gate stand you can glue 4 magnets 4x10mm from the back side. before print locate the position for the magnets in the slicer software. i print the stand with 7% support, its difficult to remove the support from the magnet recess.

3D printing settings

Print in transparent PLA, 0,4 mm Nozzle, layer thickness 0,15 mm
you need min. 180x180 mm printing area.

Gate Stand:
15% Infill, 7% support
time 4 h 21 min, Material 29 g, x1

Gate Segment:
15% Infill, no support
time 2 h 2 min, Material 15 g, x4

Segment joint:
15% Infill, no support
time 44 min, Material 6 g, x3

  • 3D model format: STL

Tags

Creator

Copyright

©

Similar 3D files

Best sellers of the category Various


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!