Focus ring (w/tab) for Nokton 50mm f1.1
- 1k views
- 0 likes
- 10 downloads
3D model description
This is a focus ring attachment for a Voigtlander Nokton 50mm 1.1.
I found that after using the 28mm Nokton 2.0, the 50mm 1.1 was tricky to get used to being able to focus as quickly. I suppose over time that this could get easier as I got more accustomed to the lens but decided to do something about it in the mean time.
The tab is vaguely modeled from the 28mm focus tab so should be a very similar size when printed and in use.
The ring should slip onto the lens from the rear as it will not fit over the aperture ring due to fine tolerances. The fit will be very slightly snug and seems to be enough to hold itself in place. That being said, it is still loose enough that it could get knocked off the lens if you aren't careful. I didn't want to put stresses on the lens barrel.
I'm not inclined to use any adhesive but perhaps some blu-tak (or equivalent) under one or two of the scalloped sections of the ring would be enough to ensure a more solid feel.
3D printing settings
Lightly sand edges to remove any sharp edges
Slide over the focus ring of the lens from the rear
- 3D file format: STL
- Publication date: 2019/04/11 at 16:26
Collection associated with this 3D model
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!