Skip to content

EPIC 3D Printed RC Race Car

3D model description

Are you new or experienced with the 3D Printing World and looking to print something functional? or are you into RC vehicles and looking into building one of the coolest 3D Printed RC Cars out there?
Then you have come to the right place.

My name is Miguel. I am an Engineering Student from Canada. I run Tacosports with the mission to offer amazing 3D Printed STEM Projects.Thanks a lot for dropping by!

This Project is the result of days of testing and reiterating. The TS-1 3D Printed RC Car was made with the purpose of being an extremely simple, affordable, reliable, and made with as many 3D printed parts as possible.I hope you have as much fun building it and driving it as I did!

The download package comes with links where I purchased my electronics, detailed instructions and printing recommendations. This project is tons of fun, Plus you get to drive a fast fully functional RC Race Car by the end of it.

The Car Uses 2M self tapping screws all over. This is to reduce complexity and costs. If you are new to the hobby you might also need to purchase a Li-Po Battery Balance charger.
The total cost of all hardware and electronics is just below $100 USD (WHICH IS ONE OF THE LOWEST PRICES FOR PROJECTS OF THIS TYPE). Even less if you already own an RC Transmitter and Receiver!

Not only is this car cost efficient, but it can reach crazy top speeds considering the hardware. +40km/h (I have personally reached 42Km/h while theorical speed is of about 52km/h)
This is what you will need to buy:

1 A2212 Brushless Motor 1000kv

1 <20A ESC (Take off the fan if it has one)

1 SG90 Metal Servo

1 2.4Ghz Receiver and Transmitter

1 >2200mah 3S Li-Po Battery

  • Assorted 2M Screws

4 MR115-2RS Bearings

8 6700ZZ Bearings

1 Super Glue

~600g of PLA or filament/resin of choice
~200g of TPU (optional)

I would really appreciate it if you could follow me on Instagram where I will be posting updates on this and other projects as well as subscribing to my Youtube Channel.

Car reveal video



3D printing settings

Most parts printed at 100% infill and 1.5mm layer height.

  • 3D file format: MTL, OBJ, STL, and ZIP



Designs 1
Downloads 2
Sales US$14

Hi! My name is Miguel. I am an Engineering Student from Canada. I run Tacosports with the mission to offer amazing 3D Printed STEM Projects. Any Purchase you make is also helping me pay my tuition. Thanks a lot for dropping by! Also Checkout my favorite progect. The TS-1 3D Printed RC Race Car. It would mean a lot if you could check my instagram @tacosportsrt



Makes created by the community

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!