Skip to content

Electronics frame for plastruder MK5

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 541 views
  • 2 downloads

3D model description

Frame to hold the extruder controller board and the relay board that attaches the the plastruder MK5 frame.

3D printing settings

You'll need 4, 22mm bolts and 2 of the shorter bolts. Print the frame, shave off a bit of the left bottom and left top feet to make sure they don't rub against the motor bearing. You'll need to clean out the 6 bolt holes in the frame (use the small allen wrench from the plastruder MK5 kit). I'd recommend screwing a bolt into each of the 6 holes and then backing them back out (this taps the holes and they will be much easier to screw back in). Place the frame on the plastruder MK5 (see image). Screw on the bottom two bolts using 22mm bolts. Put the extruder controller board and the relay board in place. Screw in the middle two bolts (22mm) and the top two bolts (the shorter ones).

  • 3D file format: STL
  • Publication date: 2018/10/29 at 16:37

Tags

Creator


Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!