Electronic airsoft speed loader

Electronic airsoft speed loader

have chosen to post the raw file, you can change it yourself if that is your interest,

if you buy this product, you must be 100 percent sure that your printer prints 100 percent on target and for the drawing, the drawing is so precise that there is no room for the slightest deviation in the print. !

many new magazines have come on the market since this one was drawn. since there have been many new magazines and with much tighter springs, it is not certain that this one can fill them completely.

Design by Designandprint.

here's what you need.
1 - screwdriver
sandpaper
strong glue
5 - 5mm screws with fine thread
2 - 3 mm screws with fine thread

Servomotor 35 KG with some motor you have to modify, then you have to remove the pin and circuit board insinde, you will fine many videos on youtube how to do that

a piece of a inner barrel

link to motor

https://www.aliexpress.com/item/32955240479.html?spm=a2g0s.9042311.0.0.7c014c4d0zNTQv

driven by 7,4 lipo

design video https://www.youtube.com/watch?v=x6EJY3Ro5GQ&t=21s&ab_channel=DesignAndPrint

Assambly video https://www.youtube.com/watch?v=Ulyn4jaF5LI&t=298s&ab_channel=DesignAndPrint

link for the drill operated speed loader
https://cults3d.com/en/3d-model/various/airsoft-speed-loader-drill-operated

azurefilm PETG

temp 225
bed 80
wall 5
infil 20