Skip to content

elastic powered pellet slinger

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is a time proven design from 2017 & is still relevant it is vertical slingshot designed to shoot off pellets with rubber bands ( also known as bullets)
also just a heads up warning
this can be cause welts to someone if misused at someone which is why you see this warning but follow the guidelines and then its safe

But where ever you use one its important to Be a responsible owner and handle properly at all times (and some basic range safety rules)& follow all laws & regulations and all proper protocol

also do not shoot people except in a established and controlled war games where the consent of all players are signed , do not brandish as people might not realize its too short to dangle any arrows or darts and confuse it with a mini crossbow
where legal you can shoot house spiders
The designer & publisher is not responsible for any misuse which we condemn any misuse
When someone 3DPrint the design they are the manufacturer and has responsibilities

**Other then the 3dprinted parts you will need rubber bands for high power fold a size 117B big band in half and put that on the prongs but for more mild shooting use size 64 rubber bands which are ( 3&1/2 inch x ¼ inch)
Another thing I included some extra pellets feel free to print as many as you need

  • to use *

Also to shoot there are two official ways to launch
* the first is a two handed method by holding with one hand and like a pinch draw in archery clamp down with your thumb while pulling back ( this can be hard on your thumb but will deliver the most firepower
* The second is to pre draw the elastics then slip on a bullet then fling the elastic this is not as effective on certain angles

also to disclaim

• downloading you accept these conditions, as well as any terms of use including where its posted, or accessorized with; also wear proper safety gear

3D printing settings

  • at least 20 % - 50% + infill or higher pla will also work as long as you do not shoot surfaces that are too hard like metal or a number of masonrtry
  • also you will need rubber bands and size 64 rubber band for a medium and mild strength ( size 64 is 3 & 1/2 inch x 1/4 inch)

if using the high power size 117B rubber band should be loop folded before attaching to the launcher

  • licensed copy* As of christmas 2019 & herby on until further notice of otherwise until then this model is not allowed to be used commercially unless under permission of the original designer & that applies to all official platforms as well
  • 3D file format: STL
  • Last update: 2020/09/19 at 22:35
  • Publication date: 2018/11/22 at 15:14





Here are 8 things I want everyone to know firstly am a caring Canadian and a Intelectual

& second hold my ideas very dearly & designs

also third as a kid i was very cerious guy who would read encyclopedias , & i still love documentries , i love collecting odds & ends of infomation I do a lot of reading

Forth i am a guy who can always find a way , and a shadow of the past & who can think in ways most people cannot

5th I am the same guy as pinshape’s Tim (Timster Postma), pin shape’s Tim Postma

6th I also like messing with people as my way of a personal bond , so if you see me messing around understand its out of my heart of gold & that its just play for me

7th I also am a huge defender of innocent childplay without adults meddling or interfering unless there is a moral , ethical or legal issue

Eighth If there is something i treasure its the innocence of a person who are a young children or a special innocent people

Issue with this design? Report a problem

Collection associated with this 3D model

Makes created by the community

Best sellers of the category Various

Add a comment


Just a heads up as of thursday may 21st 2020 the pellet slinger is out of service for the designer but the designs will still be available

Merci pour le suivi

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!