Draenei tail and legs for Monster High dolls
- 926 views
- 3 likes
- 6 downloads
3D model description
I received a damaged Abbey Bominable doll in a lot and she had her legs amputated below the knee... The previous owner tried to squeeze a pair of create-a-monster legs with disastrous results.
I turned her disability into a creative prospect as I made her into a draenei character with these very STL files I am about to share with you.
Connecting "mid" to the original doll:
The "mid" part has a slot for a 6mm nut on the inside. Place the nut inside, then place the articulation, then use a 3mm bolt to secure them in place.
Connecting "mid" to "hoof": cut a 2mm toothpick to the desired length. Insert through all 3 holes. Or print a 2x10mm cylinder to avoid splinters.
Connecting the tail to the doll's torso requires a 3mm drilled hole in the doll's back.
Post processing steps such as sanding and painting should be done BEFORE assembly.
And just to be on the safe side... articulations have been added for both regular and create-a-monster dolls.
3D printing settings
0.1 layer height
Use PETG or other sturdy filaments
at least 1.2mm wall thickness, mine turned out very brittle using PLA
90% infill or more. this is a very fragile item
- 3D file format: STL
- Publication date: 2021/03/14 at 17:26
- monster high
- hooved legs
- monster high doll
- monster high parts
- monster high 3d print
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!