Skip to content

DIN rail stand (heavy duty)

3D model description

There are some clever designs for DIN rail (35mm) stands around but none of these seem to be able to bear a range of heavy devices without falling over or starting to wobble at the slightest touch.

So here's my attempt.

It's supposed to fit 35x15 (huschiha_1.stl) and 35x7,5 (huschiha2_.stl) DIN rails but I strongly recommend using the thicker rails if you plan using a long piece like in my pictures. There's almost no wobble with the 35x15 rails.

Optionally you can install 2 further DIN-rails just to increase it's stability against torsional forces.

The rails can be fixed with coarse-thread screws. I used M3,5x14 which fits pretty good.

  • 3D model format: STL

Tags

Creator

License

CC BY NC SA

Similar 3D files

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!