This design is a model of a cruise ship. It prints in two parts, which you can glue together. This miniature features a lot of detail with 7 decks, 2 swimming pools, and more. Supports would be beneficial on the top half. However, you could get away with no supports for the entire model if you have your printer dialed in.
This boat should optimally be printed at 0.1 layer height for maximum detail to show. Infill should be around 15% - 30% and there should be at least 0.8mm of shells so the model is strong. This model can be printed at smaller sizes, but the larger the boat, the more detail will show.
Supports are not required.
I enjoy brainstorming, designing, and creating 3D prints. I also love photography and design.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!