This thing is based on thing 489709, by Charlie1982. I created the carabiner from scratch to suit my needs better, but only modified the clip slightly. The modified clip should be somewhat easier to print since I gave it more contact area with the build platform. It should also last longer since I modified the gap it has between its legs. It might not be totally compatible with thing 489709 because I made the clip's pins slightly bigger, so they might be too tight for it.
For better results, print the clip with at least 85% in fill. The carabiner itself has worked fine for me at 60-65% in fill.
Edit (12/Sep/2015): Go over to thingiverse.com/thing:1008943 for a much improved carabiner by Charlie1982. Go to his site too for other carabiner designs.
If you print them together, do so at a high in fill percentage (~80-85% or more) to have a longer lasting clip. If once assembled the clip does not move freely, you might have to slightly sand the holes in the carabiner.
I have not uploaded the plug that goes in the SpringClip. I'll get to that soon.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!