Borg Cube Geocache
- 532 views
- 3 likes
- 6 downloads
3D model description
So a friend is doing a series of Star Trek related geocaches and asked me to make one. This is the result. Although it took about forever to get it printed. I am using ABS and had really severe warping issues. I ended up buy printing both of the larger items with a substantial brim in order to get it to stick. The cube was the worst as it has very little surface (10mm) touching the bed. It failed around 6-7 times. It failed the most when using a raft, and even using a brim I had to enclose the printer in my case with a large cardboard box.
To use the box as a geocache you will need 10mm x 2mm round magnets like this https://goo.gl/jby2LB
You will also want to use either rite in the rain paper or another container, bison or dna tube or a film canister, inside as it it is not water tight
Print 8 of the retainers as there are 4 spots on the lid and the box for magnets.
thanks to Simakrima for the great design. that was easy to print!
in case you want to tinker with it here are the tinkercad links
- 3D file format: STL
- Publication date: 2021/01/13 at 12:52
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!