AIRPORT FIRE TRUCK (only resin)

-Based on airport fire trucks.

-It is a decorative element for dioramas, so the wheels.

do not rotate.

• ATTENTION! Read the printing instructions carefully and only purchase the download if you are sure.

-The download only entitles you to personal use of the file. -

-It is forbidden by the author to commercialize and profit from the file by unauthorized third parties. Modification of the original file is also prohibited.

-Based on airport fire trucks.

-It is a decorative element for dioramas, so the wheels

they do not rotate

ATTENTION! Read the printing instructions carefully and only buy the download if you are sure.

-The download only gives the right to a personal use of the file. -

-It is prohibited by the author the commercialization and profit of the file by unauthorized third parties. Modification of the original file is also prohibited

-Printed using LycheeSlicer software.

-It is designed to be printed in resin. The results in

PLA may not be satisfactory.

-It is possible to print it with automatic media, however it is.

important to deactivate the auto orientation tab in the

The brackets would spoil the details of the

sides. For 1:400 or 1:500 scale models I recommend light brackets, for larger models medium brackets can be used although they are more difficult to remove.

-The ideal is to print the piece as it is (as if the wheels touch the printing plate) but adding the supports, obviously.

-I added a file with the parameters and the ideal printing position for reference.

-Resin printing parameters are as follows:

BASE LAYERS:

-Number of layers: 6

-Exposure time: 28s

-Transition layer counter: 3

-Lift distance: 4 - 3 mm

-Lift speed: 60 - 180 mm/m

-Retract Speed 60 - 180 mm/m

NORMAL LAYERS

-Layer height: 34 um

-Light off delay 1s

-Exposure time 3.5 s

-Lift distance: 3 - 4 mm

-Lift Speed 60-180 mm/m

Retract Speed 60- 180 mm/m

SCENE SCALE COMPENSATION

-Scale X: 100% -Scale X: 100% -Scale X: 100% -Scale X: 100%

-Scale Y: 100% -Scale Y: 100%

-Scale Z: 100%

-It has been printed by LycheeSlicer software.

-It is designed to be printed in resin. The results in

PLA may not be satisfactory.

-It is possible to print it with automatic supports, however it is

important to disable the auto orientation tab of the

piece, since the supports would disfigure the details of the

sides. In 1:400 or 1:500 scale models I recommend light supports, for larger models medium supports can be used although they are more difficult to extract.

-The ideal is to print the part as it is (as if the wheels touched the printing plate) but adding the supports, obviously.

-I add a file with the parameters and the ideal printing position as a reference.

-The resin printing parameters are as follows:

BASE LAYERS:

-Number of layers: 6

-Exposure time: 28s

-Transition layer counter: 3

-Lift distance: 4 - 3 mm

-Lift speed: 60 - 180mm/m

-Retract Speed 60 - 180 mm/m

NORMAL LAYERS

-Layer height: 34 um

-Light off delay 1s

-Exposure time 3.5s

-Lift distance: 3 - 4 mm

-Lift Speed 60-180mm/m

Retract Speed 60- 180 mm/m

SCENE SCALE OFFSET

-Scale X: 100% -Scale X: 100% -Scale X: 100% -Scale X: 100%

-Scale Y: 100% -Scale Y: 100%

-Scale Z: 100%