Skip to content

A10 Superglider

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

A Glider that Flies Extremely Well
I teach engineering at a High School academy and promote aeronautical engineering with a PLA Glider CAD and flight challenge. This glider, designed for the month of October, flies better than anything I've printed before but you have to print it in a good quality PLA with .25 layers,1 or 2 perimeters and top bottom layers, and between 10 and 25 % infill.
Love it, change color after the first layer if you'd like,
but know that while Cura, Slic3r and Simplify3D can all be made to dial the first layer, that first layer must be rich in material and laid down on the bed a bit smoooshed so it adheres to itself and creates a strong, fused bottom layer. Fly it with hand and bend the entire fuselage a bit to enable more or less lift.

3D printing settings

.25mm layers
10-20% infill
1-2 walls or bottom or top layers

3D printer file information





Issue with this design? Report a problem

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!