Skip to content

3x HC-SR501 PIR sensor housing for motion reactive bed light

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 337 views
  • 3 downloads

3D model description

Motion sensitive bed light

This is a housing for the electronics in order to be install a motion sensitive bed light. The microcontroller evaluates the information from the motion sensors and thus turns the light on or off. The light remains on until no more movements are measured. I had the best result calibrating the sensors to the highest possible range and the shortest possible delay. Also make sure to set the jumper to SINGLE TRIGGER.

Required Parts:

*all product links are also affiliate links to exactly the same products I bought for the system. If you order via the link, I will receive a tiny commission.

Code

If you have no clue how to work with a Arduino, watch this video first. Start a new project in the Arduino IDE and copy paste this code. After uploading the code to the microcontroler you should be ready to go.

GIF of the working setup

  • 3D file format: STL and ZIP
  • Publication date: 2021/02/01 at 10:09

Tags

Creator

License

CC BY

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!