Why grow your own lawn (or Easter Grass), when you can simply print it?
Here's a collection of different sizes of grass tiles, which are easy to print and can be cut to length (60mm full length. Can be scaled longer, but only in the direction on the strands!!).
There's nine different files to choose, one with extra density and one round option.
As with any "hairy" print, these are printed sideways, and then one of the plates is cut free. The parts should be oriented so, that each strand starts printing from the top of the grass and ends on the root (Cura changes this when you rotate the block 180 degrees on the Z axis).This way you get a nice effect, where the grass is thinner on the top, and adheres better to the bottom plate. You can choose, if you want to have a thick bottom plate or the thin one, by simply orienting the parts accordingly and cutting the opposite plate off.
Toss a like, post a make and maybe follow me over at the IG's
Please note the layer height should be set so, that there's only one extrusion per strand( 0.2 as default). The default scaling is for 0.4 nozzles. Print cooling should be set high enough to avoid the strands to sag too much. The examples were printed with 60mm/s.
Use of a raft is highly recommended for better adhesion.
Hi there! I'm just a simple man doing simple designs, is all.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!