30mm board gun MK103 3D print

This is a highly detailed 3d printable model of the MK103 improvised mount (Baumaffe), which was originally intended as a fighter aircraft cannon, however there where several records of MK103s mounted on improvised mountings in the field as well.

Use a sharp hobby blade for careful support removal.

Supported Files Included!

Scale: 1/35 and 1/16 Highly quality scale model detail set.

In case of the resin being still soft and sticky, lay the part into the sunlight for a few hours. (remove support structure beforehand! gently heat up the part with a hairdryer to soften the supports).

Use a side cutter to detach the support structure from the model.(use a hairdryer to gently heat up the part to prevent part from breaking!)

Bumps and remains of the support can easily be filed off. Gaps can be filled with putty.

Wash the piece with soap water.

The piece can be prepared with usual primer

© Faustus Models 2022

You may only use the files provided for personal projects.

The distribution of the files is not permitted in any form f.e.: in digital or

3d printed form; the same applies to the sale of the files or the printed models, or other forms of distribution f.e.: resin casting.

If you are interested in the conditions for a commercial license, feel free to contact me.

Copyright Faustus Models

by Tom Theunissen

(minor failures might occur since this is an early version - please contact me if you experience any issues while printing)

Mountings: 0.05mm layer

Detail Parts: 0.035mm layer

SLA printer required!