1/10 Scale Modular Mezzanine For your Scale RC Garage or Diorama
- 1.3k views
- 6 likes
- 5 downloads
- 0 comments
- 0 makes
3D model description
Designed to be modular allowing you to set it up to fit your design ideas.
Modules and Guard rails assembled using M3 Screws and nuts.
Steps use M3 screws to attach to the Modules and M2 screws in their assembly.
Depending on your printer's bed size you may need to print the Support beams on an angle. Other than that everything is designed and oriented to be printed without supports.
Ideally the steps and floors should be printed on a textured sheet for added realism but its not an absolute necessity.
M3 Nylon Locknuts
M3 x 14mm
M3 x 20mm
M3 x 35mm
M2 x 7mm
M2 x 15mm
The Supports are glued in place once the modules have been assembled.
The quantity of each items is dependant on how you will want your setup to looks. The dimensions of the modules are in the pictures so you can take measurements to determine how many you need to print.
The RC Bodies, Brick wall and Garage door are not included in this set.
However, The Bodies and Garage door are available separately.
3D printing settings
no supports and parts should already be oriented for best print.
3D printer file information
- Design number: 1005647
3D design format: STL Folder details Close
- 10mm Support.stl
- 5mm Support.stl
- Bottom Step.stl
- Floor Large Diamonds.stl
- Floor Large Plain.stl
- Floor Small Diamnods.stl
- Floor Small Plain.stl
- Framing Module.stl
- Gate Stopper.stl
- Guadrail Long Side.stl
- Guardrail Gate.stl
- Guardrail W Hinge Extentions..stl
- Guardrail short side.stl
- Railing Bottom.stl
- Railing Upper.stl
- Stairs Mounting bracket.stl
- Stairs Side Spacer.stl
- Stringer Lower Left.stl
- Stringer Lower Right.stl
- Stringer Upper Left.stl
- Stringer Upper Right.stl
- Publication date: 2023-01-12 at 04:07
Best 3D printer files of the Dioramas category
Best sellers of the category Dioramas
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via Ko-Fi 💜.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Add a comment