Skip to content

Wind Turbine

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This wind turbine can produce electricity!

The wind turns the turbine and cause a LED to light up.

The stronger the wind blows, the brighter the LED lights.

I have already tested at the wind turbine it works very well. The wind turbine is already turning at the slightest wind but the LED only lights up at a slightly higher speed.

So this wind turbine is a storm-warning device.

The Motor diameter is 23mm, height is 12,8mm and the shaft is 2mm.

Bearing: DIN 625 SKF (outer diameter : 16mm; inner diameter 8mm).

This project is still in progress!

3D printing settings

The roof was printed in Red PLA with 0.20 layer thickness an 20% infill and no support.

The Mainbody was printed in Red PLA with 0.20 layer thickness an 20% infill and with support from the printing tabl.

The Gears have been printed in yellow PLA 0.15 layer thickness an 20% infill and no support.

The PLA has a very poor quality "el cheapo" but I can afford no better quality.

This would be best printed in ABS. PLA will likely soon melt and distort from the heat from the sun.

More information coming soon…

  • 3D file format: STL





Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!