(updated a new cooler option v2 with a bigger openings )
this is a 3 in 1 mount and cooler. designed for a E3D threaded v6 equipped with a volcano block v2 to give you better print quality and more z height (i got 48mm max extra in z) also gives you a better balanced hot end that is unbelievably lighter than stock metal shroud setup.
The dual 5015 blowers delivers the best in cooling.
Giving you superior quality 3D prints with great overhangs.
also has a mount for the extruder wire sleeve and clips to add a 4mm od ptfe tube spine to the wire sleeve to help keep the wires inline.
with 1 downfall (due to the odd placement of the X/Y drive rods) . you will loose 12mm in your y volume. so you will have to adjust your build volume to 188 for Y axis in your machine config and your slicer.
2x 8mm M3 screws (front screws for cooler body)
2x16mm M3 screws (rear screws for cooler body and fan brace back )
4x20mm M3 screws ( to mount the dual 5015 blowers )
2x12mm M3 screws (for the 30mm cold end fan)
Im a builder by day and a serious 3dp enthusiast by night.. (Never sleep and keep printing)
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!