Skip to content

Turboshaft Engine, with Radial Compressor and Turbine - Cutaway

3D model description

I made the running model of a turboshaft engine which uses a radial compressor and a radial turbine by vacuum cleaner before.
https://cults3d.com/en/3d-model/tool/turboshaft-engine-with-radial-turbine

This is the purely cutaway model of it.
A. The features are as follows.
① Radial compressor (Impeller), Diffuser
② Radial turbine rotor, Turbine nozzle
③ Planetary reduction gears
④ Output shaft
⑤ No metal bearing is used for every shafts.

B. Assembly Manual (PDF format, total 16 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".

C. Purchase Parts
1. Screws
M1.4x3.5L, M2x4L, M2x15L, M3x8L, M3x80L
2. Others φ1x7L Piano Wire,φ5x110L AL Pipe

D. STL file
Total STL files are 39 items including the stand and tools.
Almost of parts are re-designed to this purpose.
“ws” of last 2 digits of file name means “With Support” special designed.

E. Total Net Print Time: Approx. 64HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Especially, Air-Intake-Case201mws.stl needs about 12 hours to print.
Note: When at actual print, each parameter may be adjusted by your experience.

F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.

I do hope your success!!
[Update2019528] Sun-Gear & Manual changed

3D printing settings

See above.

  • 3D model format: STL and ZIP

Tags

Creator

Followers Followings 0
Downloads 3344

Retired Aircraft Engine Engineer
Aichi, Japan
"Aircraft Engine Museum by 3D Printer Models"
http://www7b.biglobe.ne.jp/~konchan77/

Copyright

©

Similar 3D files

Best sellers of the category Tool


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!