Skip to content

Tool clip for Da Vinci 1.0a print head

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 605 views
  • 8 downloads

3D model description

This is a clip for mounting tools like this pen holder to the stock Da Vinci 1.0a (probably 1.0 will work, too) print head. I used it to turn the Da Vinci into a plotter. The clip mounts very quickly.

The OpenSCAD file generates screw holes or, if you send the mounting bump diameter to 8.5, mounting holes (circle+square) meant to mesh with the ones in the pen holder (well, a little filing was needed), which I then welded to the tool clip with ABS slurry.

You could (perhaps with some remixing, and lots of care about safety, using laser-safety glasses, etc.) use this to help turn the Da Vinci into a laser engraver.

  • 3D file format: STL
  • Publication date: 2018/10/09 at 13:43

Tags

Creator

License

CC BY


Best sellers of the category Tool


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!