Titan Extruder Clone reinforced cover
- 464 views
- 0 likes
- 7 downloads
3D model description
The hotend was quite loose in my titan extruder clone.
I figured it was due to the bad fit and strength of the cover.
So i created a stronger cover which really locks the hotend in place when the screws are tightened.
I've printed with this for quite some time now and the print quality is a lot better than with the original cover.
Update 2019-09-03: Eventually the hotend became loose again.
Furthermore, i also noticed that the gear was slightly tilted up.
So I created a version 2 of this to fix those issues.
It has a stronger grip on the hotend and additionally you can use a short 3mm screw to tighten the hotend if necessary (haven't tested that yet since for now the fit is perfect and the hotend does not move).
Note: the screws to attach the cover need to be around 30-35mm long - additionally one longer screw (>= 40mm) is required to not tighten the gear too much - however this screw can also be omitted if not available.
The screw holes are closed with one layer intentionally to allow printing without support. Just use a 3mm drill to open them after printing.
- 3D file format: STL
- Publication date: 2020/06/22 at 06:50
Thingiverse profile: https://www.thingiverse.com/b3n3d1k7/designs
Best sellers of the category Tools
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!