Technology Outlet 2kg Spool Mount
- 294 views
- 0 likes
- 1 download
3D model description
The 2kg spool hanging unevenly on my rail was causing minor defects in the print surface, this axle allows the spool to sit centrally on a 10mm rod and spin smoothly.
Print both parts on their sides (the flat side to the bed), this will put the layer lines in the strongest orientation for the use of the final part.
Part A needs supports for the thread, part B can print without.
To assemble you just need to screw it together and thread onto a 10mm rod.
I needed to drill out the inside of the 10mm hole with a 10mm drill bit just to get it to fit, but still spin smoothly.
- 3D file format: STL
- Publication date: 2020/06/22 at 04:33
If you like my work I always appreciate any donations to help buying good coffee :)
If you have any problems or questions about any of my work, feel free to contact me and I'll do my best to help.
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!