Tap Handles V2
- 679 views
- 0 likes
- 25 downloads
3D model description
Small handle for a tap with square shaft. I do a lot of prints with threads, and some of the time it is nescessary to recut the threads when the print is finished, this does not take much effort, and can nearly be done by just holding the tap with the fingers, but not quite. So enter the Tap Handle, a small replacement for a large and clumsy Tap Iron.
These handles are created for 2.5 to 6.5mm square shaft, in order to make one for e.g. a 2.8mm shaft, either go for 3mm and accept it being slightly loose, or adjust the scale in your slicer.
To be printed with hole facing upwards. I recommend fine settings for slicer, but if you are in a hurry, it doesn't matter much. I like to print these a bit hotter than usual in PLA (again any filament should do, adjust settings accordingly) in order to improve strength, but do have in mind, these are not meant for cutting threads in steel.
- 3D file format: STL
- Last update: 2020/03/07 at 20:53
- Publication date: 2020/03/05 at 08:46
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!