Dagoma DE/DU/DUXL easy print single-piece tray support

Link to blog description: https://clubdagoma.popsell.com/max-38805/356353

Dagoma DE/DU/DUXL monobloc tray support.

Installation of the tray (normal 200x200 or add-on XL 200x300) on the support with 5 contact points.

It allows, especially for the XL version with a fibre top, to eliminate the "hollow" in the centre of the top and to regain perfect flatness. But it will still allow to reduce the curvature of some aluminium chainrings that equip our machines.

To be printed in 0.20mm layer, 33% filling for sufficient rigidity.

the STL is already placed correctly, ready to print.

The use of media that was mandatory is not recommended because their qualities generated are too random by the slicers and do not allow a good impression every time.

That is why the media are already integrated into the STL file and are optimized to avoid wasting time and material.

the type of support is "Wall", i.e. a single thickness of the nozzle diameter, in order to also avoid the nozzle from tearing them off.

Have a good print, everyone!

link to DU custom : https://www.thingiverse.com/thing:4263791

link to XL bases for DU custom : https://www.thingiverse.com/thing:4272445