Skip to content

Square Corner 3.5 Inch Hinge Shim

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1 download

3D model description

For square corner 3.5 Inch hinges with 3 holes.

Insert one or more of these, between door frame and hinge, to reduce gap between strike plate and latch bolt. Can also be used to re-align sagging doors where the bolt does not settle in strike plate because it is too high (add to upper hinge only) or too low (add to lower hinge only).

These can also help with doors that bind on last few inches of closure because the hinge mortises were cut too deep.

The shim is 1mm thick. Use multiples or scale Z axis for other thicknesses.

Installation: Remove center hinge screw. Loosen the upper and lower screws enough so the shim can be inserted. Retighten all 3 screws.

3D printing settings

100% infill, no supports

3D printer file information

  • 3D design format: STL Folder details Close
    • jab 3.5 square hinge shim.stl

    Learn more about the formats

  • Last update: 2021/03/15 at 12:46
  • Publication date: 2018/09/29 at 19:52





Designs 16
Downloads 146
Sales US$146
Followers 8
Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!