Skip to content

Spool holder & more - modular spool holders and accessories

?
Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 1.7k views
  • 3 likes
  • 50 downloads

3D model description

https://clubdagoma.popsell.com/max-38805/223433

https://clubdagoma.popsell.com/max-38805/225238

With this kit, which is scalable, modular and customizable as you wish, you can equip yourself with all the reels of different sizes and accessories you need for your prints.

reel holders from 200gr up to 3kg,

storage solutions, tool holders, etc...

Dozens of possible configurations!

A secure, 100% printable, no modification, no hardware, no drilling or other, of your Dagoma cabinet or not, or table/workbench, etc...!

for the installation of your ADD-ON "spool holder & more", nothing could be simpler:

  • print the elements you need.

  • Install the chosen fixing body and its locking (screw or clip).

  • Clip the coil holder or your accessory into the body.

  • set the "LOCK" key to lock the system.

  • A hole on the opposite side to the key insertion allows you to remove it with a thin screwdriver.

  • put the rollers adapted to the chosen support (for coil supports)

  • it's functional!

PRINTING:

Reel supports, fastener bodies, rollers, clips, screws and LOCK wrenches are to be printed in 33% fill for greater safety.

Accessories, boxes, card holders, etc... 17% is more than enough.

There's no need for brackets, I've added some detachable ones on the fixing heads) EXCEPT FOR:

  • fixation bodies. (internal supports)

DETAILS OF THE ELEMENTS OF THE KIT:

  • one body single bracket bracket for cabinet (33% - 0.20mm - bracket everywhere)

  • a body with a reinforced support bracket doubled for box (33% - 0.20mm - support everywhere)

  • one body low screw fixing for support (33% - 0.20mm - support everywhere)

  • a body high screw fixing for support (33% - 0.20mm - support everywhere)

  • short rolls for coil support up to 1kg (33% - 0.20mm - no support)

  • long rolls for coil support up to 3kg (33% - 0.20mm - no support)

  • Dago cabinet retaining clip without drilling (33% - 0.20mm - no bracket)

  • LOCK" key to ensure the supports are held in place (33% - 0.20mm - no support)

  • Clamping screw for screw fixing body (33% - 0.20mm - no support)

  • a coil support up to 1kg (33% - 0.20mm - no support)

  • a coil support up to 3kg (33% - 0.20mm - no support)

  • one SD card + USB support (17% - 0.20mm - no support)

  • a SD card holder + USB + spatula (17% - 0.20mm - no holder)

  • a single box support (17% - 0.20mm - no support)

  • a box support + SD card + USB (17% - 0.20mm - no support)

  • a box holder + SD card + USB + spatula (17% - 0.20mm - no support)

  • a box support with 1 possible clip-on option (17% - 0.20mm - no support)

  • a box support with 2 clip-on options possible (17% - 0.20mm - no support)

  • and the list is going to grow on demand!!! (do not hesitate!)

EDIT 30/04/2019 :

Adding a SD card holder + USB + spatula + tongs

(17% - 0.20mm - no support)

Addition of a support body for 5-point wall mounting

(33% - 0.20mm - support everywhere)

EDIT 11/05/2019 :

Addition of a wall-mounting body mini version

(33% - 0.20mm - support everywhere)

EDIT 30/10/2019 :

a reel holder adaptable with the supports I propose!

https://www.thingiverse.com/thing:3945317

3D printer file information

  • 3D design format: STL Folder details Close
    • CLAMP__vissage_corps.stl
    • CLAMP_version_1.stl
    • CLAMP_version_2.stl
    • clé_LOCK.stl
    • corps_fixation_mural_5_points.stl
    • corps_fixation_mural_mini.stl
    • corps_support_renforcé_23kg.stl
    • corps_support_simple_1kg.stl
    • fixation_corps.stl
    • porte_carte_SD_USB_spatule_et_pince.stl
    • rouleau_court.stl
    • rouleau_long.stl
    • support_1kg.stl
    • support_23kg.stl
    • support_SD_USB_spatule.stl
    • support_box_1_option.stl
    • support_box_2_options.stl
    • support_box_SD_USB.stl
    • support_box_SD_USB_spatule.stl
    • support_box_simple.stl

    Learn more about the formats

  • Last update: 2020/09/14 at 14:56
  • Publication date: 2020/09/11 at 18:28

License

CC BY SA

Tags

Creator

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Best sellers of the category Tools


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!