This is a spacer to lift a Panasonic TV by 25 mm.
I needed this to make room to place my Bose speakers underneath the display on both sides.
It is usable for the models:TX-L32,37,42ETW5W and TX-L32,37,42,42,47,55,60ETW5 or similar models.
It's no big deal, and maybe no one needs it but me, but it is a good example that you can quickly design and print parts for your personal use.
I love 3D printing! :-)
Insert the spacer between the base and the console of the TV.
Replace the 4 screws M5x15 by longer screws M5x30
My print settings:
Layer Height: 0,3 mm and
Width: EWH ratio 1.7 = 0.51 mm
3 perimeter (2 extra shells on Skeinforge)
Temperature: 230Â°C (PLA)
You do it on your own risk!
Be aware that the standing safety is somewhat reduced.
Verify if the part is well and stable printed.
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.