Requires 15 M3x10mm screws for the main frame and 3 M3x10mm screws for the feet.
added a file: Side V2 XL, should allow an additional 2 to 3 cm height for those of you with very large cans. Please note that this is an initial file, as I have not had time to test it. I would appreciate any comments on the new larger sides from those of you who decide to print it. :) The fifth image shows a comparison between the stock and the V2 XL sides.
An optional bracket has been added for wireless headset users that removes the cable hook from the back. File name: optional brace.
You will need to print the following: 1 x Base 2 x Sides 2 x Base Posts 3 x Feet 1 x Headphone Pole / Holder 1 x Cable Hook Hardware required: 15 M3x10mm screws Printing configuration for the different components. Base: 40% padding. 0.3 Layer height Sides: 50% padding. 0.3 Layer height Base posts: 100% padding. 0.24 Layer height Feet: 40% padding. 0.24 Layer height Pole / headphone holder: 50% padding. 0.3 Layer height Cable hook: 100% padding. 0.3 Layer height It is recommended to print the sides with a 10-15 line border to avoid deformation.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!