Slide Tobacco BoX 85 - 55 - 30 CustomizeD

Hello!! Welcome!

That's a Remix Design just 4 fun! I made a tobacco box Big enough to put almost 14g with rolling paper and filter tips.

Okay Specs 85mm X 55mm X 30mm , walls 2, infill 30, I used a 0.6 nozzle, total print time 2h30mins.

I made two remixes of the box, one with flat walls and a Z from Dragon Ball at the bottom, and one with the name POL if that's your name YOU are Lucky!.

There's 2 Slides with a Gameboy, one with a CAT and one with an Ozzaru/Monkey.

So was printed with:

• GOLD PLA
• 0.6 Nozzle
• 2 walls (1.2)
• 0.2 layer height
• Tolerance 0,2!!!! Need a printer calibrated!
• Recommend ironing 4 the Lid.

*NOTE if you print the box named POL place the base of the box to the ground manually!!

Enjoy!!