Skip to content

Slide on belt clamp (Modded for rubber belts)

?
Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 637 views
  • 1 like
  • 38 downloads

3D model description

Loved the original design of these but when building and upgrading my Tronxy X5S, discovered the clamps wouldn't slide over the rubber belts which are slightly thicker than the original steel belted versions supplied with the machine. I've increased the clearance inside by 0.22mm which provides a snug sliding fit which stays in place without any further additions but can be removed by hand without the necessity of blowtorches and bolt croppers. There is an "R" embossed on the side of the clamp to differentiate from the original size.
I've made mine out of PLA and they have proven to be reliable but I think I'll make a new set out of PETG before the printer goes into the enclosure.

  • 3D file format: STL
  • 3D model size: X 10.4 × Y 8.3 × Z 10 mm
  • Publication date: 2020/02/20 at 01:08

Tags

Creator

License

CC BY


Best sellers of the category Tool


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!