Update May 2018 see lienbacher's comment below for a version that will work with a Pi 3 B+, which has addition POE pins. I updated the v2.1 version on here with a larger pin cutout but don't have a Pi 3 B+ to test with
Updated March 2018: Added a new version (2.0) with a larger cutout for the microSD card since newer models aren't spring loaded. I also loosened up the tolerances and tweaked the design to make it easier to print, and added a latch to the cap so the Raspberry Pi is less likely to fall out.
Simple sleeve to protect a Raspberry Pi* from falling screws. The main part of the case slides over the Raspberry Pi, and a cap fits around the connectors. The parts are only held in place by friction so it probably isn't a good option for transport or if you frequently plug / unplug devices (mine just sits under my printer running Octoprint). Only the ports along the sides are exposed.
The cap part may need a small amount scaling on the z axis since the height can vary significantly with layer height and first layer thickness.
Several other of my PI case designs can be found in this collection.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!