Skip to content

Shield GB Model D (stackable)

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

A resistant model designed to be built fast and used with comfort.

13 mm height and more 7 mm for low pressure and consequently comfort on the forehead without delay in fabrication.

1h15 and 27.6 g per unit.

Stackable for night production, even with the additional border (please, calibrate the extrusion multiplier first: (files included).

The two bands (for the forehead and for the transparent shield) have ticker top and bottom and are connected by concordant symmetric arcs. These structural shapes reduce structure tensions and support forces in multiple directions, which is reinforced by the variable extrusion width in the internal arrangement.

Without logos nor corners (for easy disinfection), the design was developed from scratch based on an analysis of similar products and follow the Brazilian Health Surveillance Agency (Anvisa) specifications. It passed through long prototyping and was validated by health professionals.

Clear sheet (mold and technical drawing) included.

3D printing settings

Layer height: 0.25
First layer height: 0.2
Perimeters (shell): 3
Top layers: 4
Bottom layers: 3
Ensure vertical shell thickness: ok
Detect bridging perimeters: ok (very important for the stacking)

Infill: 15% rectilinear
Only retract when crossing perimeters: ok

Perimeters: 105
Small perimeters: 65
External perimeters: 55
Infill: 130
Solid Infill: 130
Top Solid Infill: 90
Gap fill: 105
First layer: 30

Filament temperature (PLA):
Extrude: 200 °C - 210 °C (filament dependent)
Bed: 60 °C

3D printer file information

  • 3D design format: 3MF Folder details Close
    • ClearSheetMold.3mf
    • ShieldGuten1_d7x1.3mf
    • ShieldGuten1_d7x2.3mf
    • ShieldGuten1_d7x4.3mf
    • ShieldGuten1_d7x8.3mf

    Learn more about the formats

  • Last update: 2020-04-20 at 01:05
  • Publication date: 2020-04-15 at 20:34


CC BY-NC-SA - Attribution - Non commercial - Share alike



Issue with this design? Report a problem.

Best 3D printer files of the Tools category

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!