Skip to content

Replicator Dual Fan Mount

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Quick'n dirty fan mount for the Replicator Dual.

Designed for a 40mm fan (the opening is 40.4mm side to side). The long plates (bottom and back) are 1.5mm thick the thickness for other ones (fan casing) is 1.2mm.

Unfortunatelly, the walls are thin and their thickness is not parametric, they can break easyly: "todo" list.

I'm using a taped piece of cardboard to close the thing: "todo" list.

The air exit is big, far from where is supposed to be and it is not ducted, that can have some negative impact: "todo" list.

And so on, and so on, and so on... for the "todo" list, don't be surprise if there's no much progress in the work for a while, I may even just uncheck the WIP flag and let it like this :-(


I managed to break it so I have add some reinforcement. Also added a couple of little tabs to center the thing and a sort of clip to keep it in place without the need of using tape*.

(*) Tape is still needed for the cardboard AND I think it's a good idea to use some to secure it, this time I have placed two little pads of thin double-sided tape.

The STL (v02) differs from the (green) one in the picture (hope it's fine).

Update 20 May 2014: Added a NOT tested twin fan mount.

3D printing settings

Print, remove the 4 little pins used as support, insert fan, have fun with the tape.

I printed mine with quite a low infill and is way too fragile! If there's a "next time" I'll give it a nice 50% or more.

I'm using an external DC power supply because the fan I had is rated for 12V, I have no idea if the "EXTRA" connections in the Migthyboard can be used and/or if the M106/M107 would work. May be somebody can post a comment (?) That would be nice ;-)

  • 3D file format: SCAD and STL



Designs 73
Downloads 2.3k
Followers 14

Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!