NEW AND IMPROVED!
Revision 4 has modified outlets which direct air flow in a more downward direction, and less toward the nozzles.
Also, STEP & IGES file formats (R4) are now posted.
Made to fit a third 40mm fan for active cooling. The reason I designed this is because I wanted to get air all around the print. Having air coming from just the front was not working well for my needs.
This design hugs a little closer to the extruder carriage than some other versions. This keeps it away from the front door hinge bolts!
Helpful for PLA and ABS prints.
This thing is designed to print at 0.2 layer height, 2 shells, and 15% fill, no raft or support. I had a little trouble with bridging over the ducts. My solution was to turn off bridging and change the solid layer angle to 90 degrees.
Be sure to clean out any "spaghetti" in the air ways.
The chrome fan guards need to be removed. The fan bolts are M3-10.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!