Skip to content

RC Speed Tank

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This "speed tank" creates with the components which I use approximately 25km / h and also the durable.
I have deliberately simply designed it so that soon a lot of the good will be driven by the :-D
If you have any questions feel free to contact me.

-------------------------------------------------- As shown in Fig.

  • What else is required?

2x 1: 10 combo (60A ESC & 540 35T engine)

2x Motorritzel (Module 1 11 teeth)

2x adapter pinion M1 for 3.175mm shaft

  • Ball-bearing:

8x22x7mm 608 12x Ball Bearing-/261604722227?var=&hash=item3ce8db4633:m:ml9uHfw6EXoYNAzL75XQY2A

4x13x5mm 624 12x

  • Lipo's:

2x 3x 2200mAh

  • Screws:

M4x15mm 8x
M4x60mm 12x
M3x20mm 4x
M3x10mm 4x
M3x45mm 84x

  • Nuts:

M4 20x
M3 88x

In the control simply the two channels of the spark are mixed which goes with each stick spark or with some gun sparks.

-------------------------------------------------- As shown in Fig.

  • Which parts are required as often?

Drive wheel: 2x
Basic plate 1x
Front Bumper 1x
Rear cover 1x
Chain link 84x
Caster chain tensioning 2x
Caster 8x
Side part mirrored 1x
Side section 1x
Stiffening mirrored 1x
Stiffening 1x

-------------------------------------------------- As shown in Fig.

  • Assembly:

Everything is screwed and nothing sticked. In addition, the vehicle is completely modular for easy assembly / repair

I have made all recordings for nuts so that they can be pressed into the hot state to keep them by themselves. This makes installation much easier.

I have intentionally made the camp seats slightly larger so that you can press the bearings well. This is, of course, also dependent on the printer settings.

The 42 chain links are connected to the M3x45mm and these are then secured with nuts, which can also be secured with a screw anchor or seconds glue.

The part "caster chain tension" serves as the name implies to tension the chain. This is mounted as the foremost caster since it has a different size.

  • Support:

It is only necessary with the parts "Caster" Caster chain tension "" Drive wheel and "baseplate" support.


3D printing settings

Speed: 60mm / s

Infill: 20-50% ("Stiffening" & "Side" use more)

Outlines: I've used most of the five parts, especially the drive wheel because of the gearing

All parts are aligned as I have printed them

Printing time: approx. 90h

Material: PLA / PETG

Printer: 200mmx200mm printing bed is required

3D printer file information

  • 3D design format: STL Folder details Close
    • Antriebsrad.stl
    • BasisplatteV2.stl
    • Front Bumper.stl
    • Kettenglied v5.stl
    • Laufrolle Kettenspannung.stl
    • Laufrolle.stl
    • Panzer.stl
    • Seitenteil gespiegelt.stl
    • Seitenteil.stl
    • Versteifung gespiegelt.stl
    • Versteifung.stl
    • hintere Abdeckung.stl

    Learn more about the formats

  • Last update: 2017/01/31 at 15:14
  • Publication date: 2017/01/13 at 14:04





Design 1
Downloads 21
Sales US$67
Followers 5
Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!