- 440 views
- 3 likes
- 12 downloads
3D model description
This is my Rasptop (Raspberry Desktop) that I designed. This runs on a 12v input. There is an LM2596 voltage step-down for the Raspberry PI 3. It is very portable and can use the 7" monitor or just connect to any display. I set it up so it can run on an 11.1v RC battery. I can also plug in my solar controller that I made and run it off of my 30-watt solar panel as seen in the above link. The HDMI I used was a little tight, I have a 90-degree angle one but I couldn't find it. All in all, works pretty well.
3D printing settings
R1 ABS + PLA Model
- 3D file format: STL
- Publication date: 2018/07/05 at 10:45
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.