In this model you can see several characteristics of the different visors raised in all the networks; so
I decided to optimize the design so that it comes out in the best and most complete way possible in a short time and with less use
of possible material. Therefore the design belongs to the whole community of makers in Argentina!
It is composed of the visor with adjustment and the folding acetate support.
It can be printed on any printer with a surface area greater than 170 x 180 and on 220 x 220 beds enter 2.
It comes out of one print and no media.
The acetate holder has 2 stops (one on each side) to position the acetate at 90° to cover the face or to
180° in case protection is not needed.
As for the 2 pieces that make up the visor adjustment, the one with the pinola on the outside is positioned
so that the same tension of the plastic when it is placed in its final position is maintained by pressing.
Parameters used for peak 0.4 with a time of 2 hours 5
minutes of printing.
Temperature 200° Bed 50°.
Layer height 0.28
100% filling (only in pinola and shafts to be reinforced; does not add time)
1mm shrinkage in direct extruder.
-Wall print optimization activated.
-Outside walls rather than inside walls activated
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!