Power Cube (2-6s LiPo to 5V USB power adapter)
- 807 views
- 4 likes
- 18 downloads
3D model description
2-6S LiPo to 5V USB power adapter. Ideal for all RC enthusiasts who also need 5V on the go - and you know you need it (eg. to charge your phone, smaller flight packs, your transmitter or power your goggles).
Print top and bottom, the attached stl's are the customizers default. You might want to play around with clearance if top and bottom do not fit, or adjust any other parameter you see fit.
I sanded the bottom part down to make it nice and flat for later assembly.
Insert the 5V USB PCB into the bottom part, you can screw it in, or simply glue it in. Add wires to your XT60 connector before gluing it in place. Strip your battery buzzer from its protective shrink wrap, test fit the pin header in the slot and glue the buzzers to the case. Make sure none of the parts is moving. Solder the wires from the XT60 connector to the USB PCB.
Now put together top and bottom in any direction you like. The parts should hold together well enough so you can easily glue them together.
3D printer file information
3D design format: STL Folder details Close
- Publication date: 2018/10/10 at 16:18
Best sellers of the category Tools
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!