Simple small 3/8in pocket ratchet, flip from side to side for loosening and tightening.
will have the 1/4in back up soon.
Use Part 2 and part 3 for internals, V2 of them can be troublesome.
Results may vary on printing.
https://www.youtube.com/watch?v=HH5ibLgURsQ
https://www.youtube.com/watch?v=zmsJ4ocO2dE
Use Part 2 and part 3 for internals, V2 of them can be troublesome!!!!
Be very careful when assembling, clear all burrs and edges. Make sure the gaps between the fingers are clear and do not have a lip. This lip will effect operation. When first ratcheting take care as the fingers need to be gradually worn in.
Innofil pla was used. Results may vary depending on material.
Printed at 215- 230C 40mm/s-60mm/s at 0,1mm layerheight. Retraction Enabled as I batch printed.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Add a comment