Pocket hole jig
- 731 views
- 7 likes
- 24 downloads
3D model description
This is a jig for drilling holes at a 17 degrees angle to get a quick and good joint of wooden boards.
The insert with guide holes was specially designed in OpenSCAD, so you can adjust the hole diameters the way to fit your drill bit (on pic. A) and then generate your own STL file. I suggest you make the guide holes stronger with metal (it may be copper, aluminum, or alloys but iron or steel, no doubt, better) bushings, using tubes of appropriate diameter (as shown on pic. B). The device is also compatible with a jig (see on pic. C) produced by Chinese manufacturers. You'll be able to easily find and purchase it on Amazon or AliExpress for example.
To assemble it, you need
an M6 x 90 mm bolt,
an M6 x 40 mm bolt,
an M6 x 18 mm coupling nut,
three M6 nuts,
an M6 nylon-insert locknut and a washer.
The process of assembly is shown in this tiny video.
And here's an example of the joint made with the jig.
I printed the jig out of PETG, but I consider that ABS is more suitable for making it. Supports are necessary for printing the base and drill guide.
3D printing settings
- 3D file format: SCAD and STL
- Publication date: 2021/03/04 at 06:55
- drilling guide
- drill bit
- hand tools
- pocket hole
- pocket hole jig
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!