Originally, the goal was to repair a broken Beach Parasol Foot.
This required the production of the two parts "Sunshade anchorage low and high".
In view of the encouraging results (after printing), decided to complete the design to eventually produce a complete support.
It is the latter, which is attached as *.stl files
This design is suitable for a Ø 25 mm rod. For use with a different rod, it is necessary to create a different clamping spacer or a specific adapter part.
The individual parts must be glued together at the time of assembly
After assembly, I applied an "XTC-3D" resin.
Machine used: Anet A8
Object size: 412 x 86 x 79
Printing time: about 20 hours (not verified) - Layer height: 0.2 (small parts) - 0.3 (large parts)
Printing speed: 50 mm/s
Use of PLA wire 1.75 mm
Extruder temperature 200° C
Heated bed temperature 50° C
Application of a resin on the outside of the part to ensure waterproofing (for my part, I use "XTC-3D")
Page translated by automatic translation. Suggest a better translation
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!