Skip to content

Phelps3D Filament Spool Recycle 5 Gallon Paint Mixer

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This was one of the designs I entered into the Printed Solid 100 Spool Giveaway contest featured on Chris' Basement. The design was one of several I sent for the contest. You will to print the parts. I used 1/2 inch screws to secure the two halves together and then a 500 mm x 5 mm diameter rod. I heated up the rod in my oven at 500 degrees F for about 20 minutes. Then carefully using hot pad mittens inserted it into the center hole. I suggest using a spool with many holes (the one I used has a sort of fan fin design).

See the contest results video:

3D printing settings

I printed these at 0.28 mm layer height, 30% infill in D Max red PLA+.

3D printer file information

  • 3D design format: STL Folder details Close
    • Spool5GalPaintMixerSideA (repaired).stl
    • Spool5GalPaintMixerSideB (repaired).stl
  • Publication date: 2021/07/21 at 21:39





Designs 265
Downloads 698
Sales US$178
Followers 30

3D Printing Nerd, been using FreeCAD since 0.13. Work with both FDM and Resin 3D printers. Can do commissions, but mostly non-organic models.

Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!