Skip to content

Open beam switch box

Download free STL file Open beam switch box • 3D print template, robC

Did you 3D print this model?

3D model description

Designed to hold two switches and a potentiometer, the switch holes are 12mm diameter and 8mm for the potentiometer hole.

The switches can be used to break the power connection or for lights, the potentiometer can be used to control fans outside of the program.

The size of the switch box is 80mm x 30mm x 38mm, this will allow optimal space for large switches and for cable management, there is a round opening (12mm) to allow for cables to be passed through if it be sheathed or single cables.

Mounting of the switch box can be achieved by using M4 bolts/screws (x2) via the two tabs located on the side of the box.

I would suggest using supports for the tabs due to the overhang, everything else should be fine to print in the current face down orientation. You may chose to add further supports for the side opening.

  • 3D file format: STL
  • 3D model size: X 99.8 × Y 30 × Z 38 mm





Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!