Mounts for heatbed's insulation
- 184 views
- 0 likes
- 1 download
3D model description
Supports for heatbed's thermal insulation made from cork boards.
There is an error on the pics, the PCB is upside down.
The copper must be on the side of the cork.(see the picture provided in the Notes/Custom section, "Mount assembled" for use it in the right way)
V.1 and V1.1
What is needed:
Print "support insul v1.2_fixed.stl" x 3
Print "support insul v1.2_STRAIN_fixed.stl" x 1
Print "CR-10_Y-Axis_wire_restrain_bracket_cover.stl" x 1
Cork boards 6mm x 2 (310mm x 310mm for CR-10)
PCB single face x 1 (same size than cork board for CR-10, at least 260mm x 260mm min).
M4 brake Nuts x 4 (M4 screw on CR-10)
Countersunk flat socket head screw M4x50mm x 4 (CR-10 Screw may be too short)
Washers size Id: 5mm Ed :9.8mm
Follow safe work procedures.
Always wear the right personal protective equipment and clothing.
Enjoy your self
Don't forget to tip your designers
Warning: Strain relief bracket is designed for a Creality CR-10 heatbed.
Glass plate bed holder for this set can be found here
- 3D file format: STL
- Publication date: 2021/02/10 at 03:31
- cable management
- cr10 upgrade
- heated bed
- strain relief
Best sellers of the category Tool
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!