Skip to content

MK8 Spring Loaded Upgrade Designed for Stainless Steel Printing

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

After having arms slowly deflect up on me I began to look for a more permanent solution. There are several different types of aluminum and ABS models out there. I took my MK8 design, added the pin and tab found on Whpthomas's version, and made a few modifications to get it printable at Shapeways in stainless steel. I know there were possible tolerance issues considering Shapeways gives a very large tolerance. The part I received measured very close (within .15mm), If you have this made, bear in mind the possible tolerance issue.

3D printing settings

I had front arm printed at Shapeway's

I printed off the back piece in PLA. I never see any warping on the back piece. It is basically a spacer and holds the spring. I also did not want to add the extra weight.


3x10x4 Bearing

10mm M3 button head bolt

M3 nut

small washer

flat head m3 x10 bolt

compression spring. I am using this one a jones spring:

I bought the spring from mcmaster carr as part # 9657K333

This works just like all the other extruder modifications. I printed the pin upside down. It only lays a single circle on the first layer, but it printed fine because it is so small so it didn't fall over. Use the flat head on the top right of the stepper to hold the back piece on. The hole for the bearing screw I made purposely a little small so I could try to tap threads in it. It took threads but it is not something I would not trust it so I also put the nut on the back. Use one of the original bolts to hold on the arm with the pin placed inside. I put a little grease on the pin as well. Insert spring and bolt it all back together. It took up all the space available and I was going to print a slightly narrower back in order to give a little more space, but it has been printing for about 40 hours now without issue so I have not done that .

  • 3D file format: STL
  • Publication date: 2018/11/22 at 17:18



Designs 26
Downloads 1.5k
Followers 6



Best sellers of the category Tool

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!