noticed the design was a bit off, I've now edited it and and made it fit proper with lots of room for the silicone sock and wires etc, saves one heck of a lot of weight on the carriage, this is made for use WITHOUT a part cooling fan so mostly only good for ABS and other materials with high warp and split factors. reason for doing the swap is because the hotend cooling fan pushes alot of air out of the bottom of the stock carriage, this helps eliminate that draft which can cause warping and layer splitting along with other issues we run across.
also included are the step files i took to get to the finished product, first file is basically the fixed version of the original, the second "Edited" version is with the stronger side fins but crude edges, third "Clean" edition is the strongers fins version with some cleaner looks to the added strength parts
Print in a good heat retardant material like ABS, PETG, Polycarbonate, Etc
Print with fins standing up and add supports under the mounting bracket ( as pictured in first picture).
BE CAREFUL REMOVING THOSE SUPPORTS!
pictures to come after this Benchy is done!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!