Model inspired by those who roam the web, has some details so that the acetate does not fog with the breath. and only open in one direction, not to make a mistake when placing the transparent sheet.
The ideal sheet to use is 29cm x 25cm, it does not need perforations, it adjusts with the pressure of the model.
In approximately one kilogram of PLA, we get about 40 - 45.
With big spikes they usually come out pretty fast. Best of luck to you and success.
Another STL (V9) was added that is compatible with 150-micron acetates. This one does not have the same grip as the V7 model. But it is still fully functional. Any recommendation is welcome
An earlier version (V2) was added, as we were faced with the challenge of using 300 micron sheets. These same slides in the previous masks. These can only be used if you use a fastener on the top edge of the acetate.
Layer height: 0.2mm - 0.3mm
Speed: 60mm/s (Recommended 40mm/s)
Perimeter: 4 to 7 layers.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!